Product Details:
eSun 1.75mm PLA+ Black Filament - 1kg Spool
eSun’s 1.75mm PLA+ is stronger and tougher than standard PLA filament.
Excellent quality, vacuum packed, and on an easy-to-view transparent spool.
eSun is a top supplier of 3D printer filament, and we’re happy to be carrying their inventory. eSun is an active part of the 3D printer community, and you’ll often see them represented at Maker Fairs and 3D Printer Expos. They take excellent care with their production methods, and each spool comes vacuum sealed in a pouch with moisture-absorbing desiccant.
In short, eSun knows their stuff. We’re extremely happy with the quality and consistency of their material.
Features:
• Like regular PLA, it is still 100% biodegradeable.
• Elongation at break is 29%. Regular PLA is 5%. That means it was tested to stretch 29% before finally failing.
• Izod impact Strength (receiving a sharp blow): PLA+ absorbs 7KJ/m2, where regular PLA is only 4.2KJ/M2
Specifications:
• Base chemistry: polylactic acid biodegradable thermoplastic
• 1.75mm nominal diameter (spec’d +/- 0.05, but is in practice closer to +/- 0.03)
• 1kg spools on transparent LARGE diameter (easy unspooling) reels, vacuum sealed with desiccant
• Suggested build parameters:
• • Print temperature 190-210c
• • Base temperature: 0/65c
• • Feed speed: 30-90mm/s
• • Idling speed: 90-150mm/s
Please note: Colors may appear to vary slightly due to display differences on your computer hardware.