Product Details:
This two-for-one device has the Arduino® built-in. Bluetooth Bee with Arduino® is an enhanced version of the Bluetooth Bee.We added an onboard ATMEGA168 to it to make it a full-featured Arduino® while maintaining the same footprint and instruction set as the Bluetooth Bee. Plus, it still allows you to stack it on XBee Carrier, XBee® Shield, and UartSBee for expansion or reprogramming
Specifications:
• Small footprint • Identical settings and pairing methods as the Bluetooth Bee • Software serial port adopted between the Bluetooth module and ATMEGA168 • Remains compatibile with XBee Carrier, XBee® Shield, and UartsBee for expansion • Typical -80dBm sensitivity • +4dBm RF transmit power • Fully qualified Bluetooth V2.0+EDR 3Mbps Modulation • Operating voltage: 3.3v • Built-in antenna
Software Features • Software serial port communication method • Default Baud rate: 38400 • Supported Baud rate: 9600, 19200, 38400, 57600, 115200, 230400, 460800 • Under RTS/CTS data transmit-receive framework • Auto connect the last device on power as default • Auto-reconnect in 30 minutes after out-of-range disconnection • Ability to disconnect via a rising edge on PC2 • Working status signal on PB2: low – not working, high – working • Paired-up status indicator on PIO 10(a red LED) and PIO 11(a blue LED): • Paired: red and blue blinks 1 time/2s in interval • Unpaired: blue blinks 2 times/sec • Default pincode: 0000
|