Product Details:
OSEPP™ 101 Arduino® Basic Starter Kit
Discover Arduino® through fun and easy lessons. This starter kit comes with OSEPP Uno R3 plus board which is the basic starter model. It serves as a great starting point to the wonderful world of Arduino®. Kit comes with step-by-step instructions with diagrams and whole bunch of parts to get started on projects like Volt meter, LED game and more.
Built on the 'open-source electronics prototyping platform', and compatible with existing Arduino® software lilbraries.
Parts Included:
OSEPP UNO R3 Plus x1
6 feet USB type A to mini-B x1
Tact push switch 6mm x 6mm – through hole x2
DIP switch 4 position – through hole x1
1Kohm potentiometer (variable resistor) – long pins x1
10Kohm potentiometer (variable resistor) – long pins x1
330 ohm axial resistor, 1/2W, 5% x20
1 kohm axial resistor, 1/2W, 5% x5
10kohm axial resistor, 1/2W, 5% x5
LED through hole – Red, 8.7mm height, ~2V drop, ~10-20mA x2
LED through hole – Yellow, 8.7mm height, ~2V drop, ~10-20mA x2
LED through hole – Green, 8.7mm height, ~2V drop, ~10-20mA x2
LED through hole – White, 8.7mm height, ~2V drop, ~10-20mA x2
LED through hole – Blue, 8.7mm height, ~2V drop, ~10-20mA x2
Two digits 7-segment LED – RED x2
Buzzer, 5Vo-p x1
NPN transistor x2
Breadboard – 30 columns x 14 rows (include 2 VCC and 2 GND) x1
Ribbon Jumper Cables x40
9 Volt Battery Connector x1
2cm x 2cm x 3mm thick double side tape x2
Information sheet – Arduino® UNO diagram + basic electronic theory x1
Kit container x1
Specifications:
• Microcontroller: ATmega328P • Clock Speed: 16 MHz • Flash Memory: 32 KB • SRAM: 2 KB • EEPROM: 1 KB • Operating Voltage: 5V • Input Voltage: 6-12 V • Digital I/O Pin Count: 14, including 6 for PWM • Analog Input Pin Count: 6 • Other Connections: Mini-USB, ICSP for ATmega2560, DC power connector, 4-pin latchable Molex connector • Power Source: USB or external DC power supply
|