Tip Top Electronic Supply - Search Results for 115/EFSP

Product Details:
For general purpose electrical and electronic test requirements, the Fluke 115 true-rms digital multimeter provides the perfect answer. Its simple operation, compact design and ease of use makes it perfect for quick verifications and field service use.

The Fluke 115 displays true-rms voltage and current readings with 6000 count resolution, tests diodes, frequency, continuity and capacitance and provides Min/Max/Average readings to record signal fluctuations. A large white LED backlight aids work in poorly lit areas. Its easy-open battery access door makes battery changes a snap.
Fluke 115 multimeters are independently tested for safe use in CAT III 600V environments.

Features:
• Large white LED backlight to work in poorly lit areas
• Resistance and continuity
• Frequency and capacitance
• Maximum Voltage ac/dc 600V
• 10A ac/dc current measurement (20 A overload for 30-seconds max)
• Min/Max/Average to record signal fluctuations
• CAT III 600 V safety rated

Safety conformance:
All inputs are protected to CE, IEN61010-1 CAT III 600V. UL, CSA, TÜV listed and VDE.

Specifications:
Maximum voltage between any terminal and earth ground	600 V
Surge protection	6 kV peak per IEC 61010-1 600 VCAT III, Pollution Degree 2
Display	Digital: 6,000 counts, updates 4 per second
Bar graph	33 segments, updates 32 per second
Operating Temperature	-10 °C to + 50 °C
Storage Temperature	-40 °C to + 60 °C
Battery type	9 volt Alkaline, NEDA 1604A/ IEC 6LR61
Battery Life	400 hours typical, without backlight

Accuracy Specifications:
DC millivolts	Range: 600.0 mV
Resolution:	0.1 mV
Accuracy:	± ([% of reading] + [counts]): 0.5% + 2
DC volts	Range/Resolution: 6.000 V / 0.001 V
Range/Resolution:	60.00 V / 0.01 V
Range/Resolution:	600.00 V / 0.1 V
Accuracy:	± ([% of reading] + [counts]): 0.5% + 2
AC millivolts1 true-rms	Range: 600.0 mV
Resolution:	0.1 mV
Accuracy:	1.0 % + 3 (dc, 45 Hz to 500 Hz)2.0 % + 3 (500 Hz to 1 kHz)
AC volts1 true-rms	Range/Resolution: 6.000 V / 0.001 V
Range/Resolution:	60.00 V / 0.01 V
Range/Resolution:	600.0 V / 0.1 V
Accuracy:	1.0 % + 3 (dc, 45 Hz to 500 Hz)2.0 % + 3 (500 Hz to 1 kHz)
Continuity	Range: 600 Ω
Resolution:	1 Ω
Accuracy:	Beeper on < 20 Ω, off > 250 Ω; detectsopens or shorts of 500 Ωs or longer.
Ohms	Range/Resolution: 600.0 Ω / 0.1 Ω
Range/Resolution:	6.000 kΩ / 0.001 kΩ
Range/Resolution:	60.00 kΩ / 0.01 kΩ
Range/Resolution:	600.0 kΩ / 0.1 kΩ
Range/Resolution:	6.000 MΩ / 0.001 MΩ
Accuracy:	0.9 % + 1
Range/Resolution:	40.00 MΩ / 0.01 MΩ
Accuracy:	5 % + 2
Diode Test	Range/Resolution: 2.00 V / 0.001 V
Accuracy:	0.9% + 2
Capacitance	Range/Resolution: 1000 nF / 1 nF
Range/Resolution:	10.00 µF / 0.01 µF
Range/Resolution:	100.0 µF / 0.1 µF
Range/Resolution:	9999 µF / 1 µF
Range/Resolution:	100 µF to 1000 µF
Accuracy:	1.9% + 2
Range/Resolution:	> 1000 µF
Accuracy:	5% + 20%
Lo-Z Capacitance	Range: 1 nF to 500 µF
Accuracy:	10% + 2 typical
AC amps true-rms (45 Hz to 500Hz)	Range/Resolution: 6.000 A / 0.001 A
Range/Resolution:	10.00 A / 0.01 A
Accuracy:	1.5% + 3
	20 A overload for 30-seconds max
DC amps	Range/Resolution: 6.000 A / 0.001 A
Range/Resolution:	10.00 A / 0.01 A
Accuracy:	1.0% + 3
	20 A overload for 30-seconds max
Hz (V or A input)2	Range/Resolution: 99.99 Hz / 0.01 Hz
Range/Resolution:	999.9 Hz / 0.01 Hz
Range/Resolution:	9.999 kHz / 0.001 kHz
Range/Resolution:	50 kHz / 0.01 kHz
Accuracy:	0.1% + 2
Notes: 1) All ac voltage ranges except Auto-V/LoZ are specified from 1 % to 100 % of range. Auto-V/LoZ is specified from 0.0 V. 2) Temperature uncertainty (accuracy) does not include the error of the thermocouple probe. 3) Frequency is ac coupled, 5 Hz to 50 kHz for ac voltage. Frequency is dc coupled, 45 Hz to 5 kHz for ac current. 4) Temperature Range/Resolution: -40 °F to 752 °F / 0.2 °F 2) Frequency is ac coupled, 5Hz to 30 kHz for ac voltage